







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Henderson Homeowners
Henderson sits in one of the harshest sun and wind zones in the valley, and windows and doors take the hit first: seals shrink, sliding tracks fill with grit, and vinyl frames on west-facing walls can warp within a decade. We install and replace windows and doors built for that specific pressure, and we put the flat price in writing before anyone touches a frame. Our technicians have up to 19 years of experience, every crew is background-checked and uniformed, and a live person answers calls around the clock. If a door is jammed or a window is cracked and letting the heat in, we’re ready to move on it in Henderson. Call (833) 954-5920.
What Our Windows & Doors Service Includes

Window Installation
Window installation is new construction or a rough opening where the whole unit and frame go in. You need it when you’re building, adding on, or changing a window’s size and shape. For full-scale work like that we also coordinate with our home page and our Home Additions & ADU team, and we set each unit level, flash it correctly for stucco and block walls, and photograph the opening before the finish goes back on.
Door Installation
Door installation covers entry, patio, and interior doors set into a new or corrected opening, including the thresholds and weatherstripping that keep desert dust out. You need it when a door won’t square up, the frame has swollen, or you’re upgrading to something with real hardware. We verify the rough opening, check the plumb line with a level, and confirm the latch and deadbolt catch cleanly before we leave.
Window Replacement
Window replacement is swapping a failing unit in an existing opening, commonly the case for Henderson homes built through the 1990s and 2000s where the original glass has lost its seal. You need it when you see fog between panes, condensation you can’t wipe away, or rising summer power bills. We measure to the existing frame, so the stucco and interior trim survive the swap, and we haul the old unit away.
Impact Windows & Doors
Impact windows and doors use laminated glass and heavier framing rated to resist windborne debris. You need them where a window is exposed to open lots, ridgelines, or wide streets that funnel wind, and they also cut outside noise. We match the assembly to your wall type and go over the ratings with you in plain terms, not just a sticker on the glass.
Energy-Efficient Windows
Energy-efficient windows pair low-E coatings and argon fill with frames that won’t conduct heat like aluminum does. You need them when rooms facing the afternoon sun stay hot even with the air running. We explain the trade-off between a darker tint that blocks more solar gain and the natural light you’d lose, so you pick the balance that fits the room.
Sliding & Patio Doors
Sliding and patio doors get the most wear of any door in the house: a track that collects sand, rollers that flatten, and a panel that no longer seals. You need service when the door drags, jumps the track, or lets air past the weatherstripping. We replace tracks and rollers, re-square the frame, and install new impact sliding glass doors where the opening calls for them.
Impact Garage Doors
Impact garage doors use reinforced panels and heavier hardware rated for high wind. You need one when the garage is the largest opening on the house and the factory door is the original single-layer model. We confirm the bracing spec and track strength before ordering, because the safety springs and cables behind an overhead door are genuinely dangerous to adjust; that work stays with a trained technician, never a DIY project.
Custom & Geometric Windows
Custom and geometric windows cover arches, half-rounds, and angled units cut to fit irregular openings. You need them on two-story entries, stairwells, and rooms where a standard rectangle wastes the wall. We template the opening, order to spec, and check the fit against the template before the finish trim closes it in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with established manufacturers whose parts and glass are available years after the house is built. Atlas window products are common on newer Henderson construction, and we know the frame and glazing lines well enough to match a replacement unit to the rest of the wall. Tamko door and entry systems turn up throughout the valley, and we’ve handled the hardware and threshold details more times than we can count. PGT is the name many homeowners here ask about for impact glass, and we understand how its laminated assemblies and frame profiles behave in Southern Nevada heat.
Knowing a brand means knowing where it wears: which seal fails first, which roller flattens, which gasket shrinks in the dry air. That knowledge is what turns a replacement into one visit instead of three. Whether you have Atlas, Tamko, PGT, or any other make on the house, we can help, and we’ll tell you plainly if a repair will outlast a replacement or if it’s time to swap the unit.
Signs You Need Windows & Doors Right Now
- Fog or moisture between the panes. That cloudiness means the seal separating the glass has failed, and the insulating gas is gone. The window still keeps weather out for a while, but its efficiency is already lost, and the haze gets worse every summer.
- A door that sticks, drags, or won’t latch. A swollen frame or dropped hinge is the usual cause, and it often shows up after the hot season. A door that won’t close fully lets dust and treated air escape, and a latch that misses is a real security gap.
- Daylight or a draft around a closed window. If you can see light at the frame or feel air moving on a breezy day, the weatherstripping or sealant has failed. Small gaps let in dust and fine sand, and they push your cooling bill up all summer.
- A sliding glass door that jumps the track. Worn rollers or a bent track make a heavy panel hard to move and easy to derail. Left alone, the door stops sealing at the bottom, and that gap is where water gets in during a monsoon storm.
- Warped or cracked frames. Vinyl and wood frames can distort from years of sun exposure, and glass cracks under windborne debris. A warped frame can’t hold a seal, and cracked glass is a safety issue the moment a storm rolls in.
Our Windows & Doors Process – Step by Step
- 1
Written scope and flat price first. We walk the openings, measure each one, and hand you a flat written price with the scope spelled out before any work starts. Under Clause 1 of the Haven Standard, the number is on paper before anyone picks up a tool, and no change proceeds without a signed change order.
- 2
Material and style selection. We go over frame material, glass type, coating, and hardware, and we name the brands so you can compare. You get the trade vocabulary explained in the same breath, so you’re choosing between real options, not guessing at a catalog.
- 3
Precise measurement and template. We measure to the existing frame or template the rough opening for custom and geometric units. This is where a good job is won, since a measurement off by an eighth of an inch shows up later as a draft or a gap in the trim.
- 4
Removal and installation. The crew protects floors and furniture, pulls the old unit, checks the substrate, and flashes and seals the new one correctly for stucco or block. We document the opening and the substrate with photos, and the photo record is part of every visit, not an add-on.
- 5
Final check and walkthrough. We confirm each unit opens, closes, latches, and locks cleanly, and we test the weather seal. You walk the job with us, we hand over the written warranty and the photo record, and the 365-Day Done Right Promise stands behind the work.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Henderson?

The short answer: window replacement in Henderson runs $4,500 – $15,000 for a typical set of openings, and impact window installation runs $8,000 – $25,000 depending on count, size, and rating. A single-entry door replacement is usually on the lower end, while a full-house impact package with sliding glass doors lands near the top. The biggest cost drivers are the number of openings, the glass type (impact laminated vs. standard low-E), frame material, and whether a custom or geometric shape needs templating.
To avoid overpaying, ask for the price per opening rather than a lump total, and confirm what’s included: removal and disposal of the old unit, flashing and sealant, interior trim, and the written warranty. Our free estimate gives you a flat written price with the scope itemized, plus a documented photo record of what we found. If you already have a competitor’s written quote, our Free Second Opinion reviews it line by line at no charge, so you can see exactly where the numbers diverge before you decide. Call (833) 954-5920 for an exact quote, since every opening gets measured before we price it.
Windows & Doors Near Henderson – Our Service Area
We work across the Henderson service area and into Whitney, Paradise, Boulder City, and the broader Las Vegas valley. Schedule an estimate and we’ll confirm a time that fits your week, and if you’re in a nearby neighborhood like Green Valley or Anthem, we’ll tell you when we can be out. We also serve Enterprise, Spring Valley, Summerlin, North Las Vegas, and Sandy Valley.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Henderson

Windows and doors service covers installing, replacing, and repairing the openings in your home’s walls: window units, entry and interior doors, and sliding and patio doors. It includes the frame, glass, hardware, weatherstripping, and the flashing and sealant that keep water and dust out. At Rowan Construction Group Henderson, we handle everything from a single cracked window to a full-house impact package with custom geometric units. Call (833) 954-5920 to talk through what your home needs.
A single window or door usually takes a few hours, while a full-house window replacement typically runs one to three days depending on the count and the wall type. Impact units and custom geometric windows can add time because they’re ordered to spec and templated first. We give you a realistic timeline in the written estimate, and we don’t promise a same-day remodel, since a window package done right needs measurement and ordering. Call (833) 954-5920 to get your openings measured.
Window replacement in Henderson runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000 depending on the number and size of openings. Entry and sliding door replacements fall within similar ranges, with impact sliding glass doors at the higher end. The price depends on glass type, frame material, and whether the unit is custom. Call (833) 954-5920 for an exact quote; estimates are free.
Yes, we service PGT impact windows, along with Atlas and Tamko products and other makes throughout the valley. Knowing a brand means knowing its frame profiles and how its laminated glass behaves in the desert heat, which helps us match a repair or replacement to what’s already on the wall. We’ll tell you whether a repair is the smart call or whether a full replacement makes more sense. Call (833) 954-5920 to schedule an assessment.
No, the price doesn’t change once work starts unless you approve a written change order. We hand you a flat written price with the scope spelled out before anyone picks up a tool, and no change proceeds without your signature. That discipline is what has kept our projects within a few percent of the agreed cost. Call (833) 954-5920 to get your written price.
Yes, every job is backed by the 365-Day Done Right Promise: if it isn’t done right, we make it right, and the guarantee is printed on every page and backed by a terms page, not an asterisk. You get the written warranty at the walkthrough along with the documented photo record. For impact glass and hardware, the manufacturer’s warranty also applies, and we’ll walk you through it. Call (833) 954-5920 with any questions.
Clear the area around each opening, move furniture and wall hangings back a few feet, and take down curtains and blinds so the crew can reach the frame. That’s most of it, and it keeps the work moving and your belongings protected. We protect floors and cover the area before we start, and we photograph the opening and substrate as we go. Call (833) 954-5920 and we’ll confirm what your specific job needs.
Schedule Your Windows & Doors Service in Henderson Today
Get a flat written price before any work starts, backed by the 365-Day Done Right Promise and a documented photo record on every visit. Our technicians are ready to measure your openings and walk you through the options, and the estimate is free with no obligation. If you’re ready to stop guessing at the cost and get a number you can compare, call (833) 954-5920 to schedule your free estimate in Henderson.
Written by the team at Rowan Construction Group Henderson.












