







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Henderson Homeowners
Fence Installation in Henderson runs $3,500 to $9,000 for most residential projects, and the number depends far more on soil, wind, and wall conditions here than on the material you pick. That’s the part most quotes skip. Henderson sits on caliche and decomposed granite in a lot of neighborhoods, and posts set in that ground without the right prep lean within a season or two. Our technicians have up to 19 years of experience setting posts in exactly this dirt, and they’ll tell you what they found before anyone digs. Under Clause 1 of The Haven Standard, you get the written price before work starts. Call (833) 954-5920 for a free estimate.
What Our Fence Installation Service Includes
Wood Fence
Wood fencing means cedar, redwood, or pressure-treated pine set on posts and rails, and it’s the default choice when you want a warm look on a side yard or a short run along a property line. You need it when a wood fence has gone gray, split at the rails, or started leaning after a monsoon gust. We set posts below the frost line into concrete, brace the corners, and space pickets to a consistent reveal so the run reads straight from the street.

Chain Link Fence
Chain link is galvanized or vinyl-coated steel mesh stretched over top rail and line posts, and it’s the practical pick for side yards, pet runs, and long property boundaries where budget matters. You need it when a dog keeps getting out or when a boundary line needs a physical marker that holds up to heat. We tension the mesh properly, set terminal posts in concrete, and add tension bands and truss rods so the fabric doesn’t sag between posts after the first summer.

Vinyl Fence
Vinyl fencing is PVC extruded into pickets, rails, and posts, and it holds color without staining or sealing. Henderson’s UV load is brutal on wood, which is why vinyl survives here with nothing but an occasional rinse. You need it when repainting a wood fence every few years has stopped appealing. Vinyl Fence Installation in Henderson runs $3,500 to $9,000, and we spec panels with steel or aluminum inserts in the bottom rail so the fence doesn’t oil-can in wind.

Aluminum Fence
Aluminum fencing is powder-coated tubular metal, usually in a flat-top or spear-top profile, and it’s what you want when the goal is a boundary marker or pool code barrier rather than full privacy. It won’t rust in dry desert air, and it stays put through the wind gusts that come off the McCullough Range. Aluminum Fence Installation in Henderson runs $4,000 to $10,000, and we set posts in concrete footings sized to the panel height and local exposure.
Iron Fence
Wrought iron fencing is heavier gauge steel, often with ornamental detail, and it’s the choice for front yards in older Henderson neighborhoods where the architecture calls for it. You need it when an existing iron fence has rusted through at the weld joints or when security matters more than privacy. We prep and prime bare steel before finish coat so rust doesn’t start at the cut edges, which is where cheap iron fences fail first.
Fence Repair
Fence repair covers post replacement, rail splicing, picket swapping, gate rehang, and re-tensioning, and it’s often the honest answer when a fence has one bad section rather than a whole failure. You need it when a car has clipped the corner, when a post has rotted at the soil line, or when a gate drags after the ground has shifted. We pull the damaged post, reset it in new concrete, and document the repair with photos so you can see what was replaced.
Privacy Fence
Privacy fencing means a solid barrier with no gaps, typically six feet tall in wood or vinyl, sometimes with a lattice topper to break up the height. You need it when a new build next door has a second-story window aimed at your patio or when a side yard opens onto a busy street. We coordinate height with Henderson’s residential fence code limits before we order material, so the finished run passes inspection the first time.
Fence Gates
Fence gates are the hinged or sliding opening in a fence line, and they carry most of the wear in any fence system. You need a new gate when the old one sags, won’t latch, or is too narrow for a trailer or RV. We build gates with a diagonal brace and a proper hinge set, set the post in a deeper footing than a standard line post, and hang the gate so it clears the ground through the full swing.
Commercial Fencing
Commercial fencing covers security perimeter, dumpster enclosures, and property line barriers for small commercial properties around Henderson. You need it when a tenant needs a screened enclosure or a lot needs a controlled access point. We scope commercial work with a written quote and a documented record on every visit, same as residential, and coordinate the inspection schedule with the property manager.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with Atlas fence and railing products and know where their powder-coat finish wears on a sun-exposed top rail, which is the first place a fence starts to look old in Henderson. We also install and service Boral composite and cellular PVC fencing, and we’re familiar with how Boral panels behave across a full summer without shade. If your material spec calls for PGT hardware or fasteners, we’ll confirm it’s the right grade for the exposure before we install.
Fence material matters less than how it’s set, but a good spec still matters. We’ll tell you when an Atlas aluminum panel is the better call for a boundary line and when a Boral composite run makes more sense for a yard that gets western sun all afternoon. Whether you have Atlas, Boral, PGT, or any other make already on the property, we can help, and we’ll say so plainly if the answer is repair rather than replace.
Signs You Need Fence Installation Right Now
- Posts are leaning after a wind event. A post that has shifted in the ground usually means the footing wasn’t set below the loose soil layer. Waiting a season means the fence pulls apart at the rails, and that’s a whole-run replacement instead of a repair.
- Your gate drags or won’t latch. A sagging gate is the most common early failure signal, and it usually traces to a hinge post that has lost its footing. Catching it early means a post reset, not a new gate.
- Rust has reached the weld joints on iron or steel. Surface rust is cosmetic; rust at a weld is structural. Once water gets into a joint, the repair cost climbs fast.
- Wood pickets are splitting at the nail line. Henderson’s low humidity pulls moisture out of wood and shrinks it around fasteners. Split pickets fall out on their own and leave gaps that compromise privacy.
- A fence is missing or damaged along a pool or property line. Pool barriers and boundary fences carry code and liability implications. If either is compromised, it’s worth a look this week rather than next month.
Our Fence Installation Process – Step by Step
- 1
Site walk and measurement. We walk the property line with a tape and a level, measure the run, check for buried utilities through the 811 call, and identify where the ground changes grade. We photograph the existing condition so you have a record of what we found.
- 2
Written price and scope. You get a flat written price with material spec, post spacing, footing depth, and what’s included in removal or disposal. Clause 1 of The Haven Standard means the price is written before anyone starts, and no change proceeds without a signed change order.
- 3
Material delivery and layout. We stage material on site, then string a line and mark every post location before we dig. That’s where a straight fence is made, not at install, and it’s why we don’t skip the layout step even on a short run.
- 4
Post setting and curing. We dig footings to depth, set posts plumb with a level, and pour concrete. Posts cure before rails go on, which is a day or two of patience that keeps the fence from moving under load.
- 5
Fence install and cleanup. We hang panels, install gates, and clean up the site. Before we leave, you get a documented photo record of the finished run, the footings, and any repair along the way, so you know exactly what’s under the ground.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Henderson?

Most residential fence installation in Henderson runs $3,500 to $9,000, and that range covers the full spectrum from a short chain link run to a vinyl privacy fence across a full back lot. A typical vinyl privacy fence for a standard quarter-acre back yard runs $3,500 to $9,000 depending on linear feet, gate count, and how much of the ground is caliche that needs a breaker rather than a shovel. Aluminum fencing runs $4,000 to $10,000 for the same footprint because the material costs more and the panels are pre-assembled.
What moves the price: linear feet (the single biggest factor), material choice, number of gates, removal and disposal of an existing fence, slope requiring stepped panels, and subsoil conditions. Caliche is the one most quotes get wrong. A contractor who hasn’t dug in Henderson soil may quote a footing depth that doesn’t hold, and the fence leans the first summer.
To avoid overpaying, ask for a line-item written quote with post spacing and footing depth spelled out so you can compare apples to apples. Our free estimate includes a written scope, a flat price, and a line-by-line review of any competitor’s quote you bring us as a free second opinion. You’ll know what’s included before you sign anything.
Fence Installation Near Henderson – Our Service Area
We work throughout Henderson and the surrounding valley, including Whitney, Paradise, Winchester, and Boulder City, plus Enterprise and Spring Valley on the south and west side. Response times depend on the day and the job size, and we’ll give you an honest window when you call rather than a promise we can’t keep. If you’re in Whitney, our team handles Fence Installation in Whitney with the same process and the same written price. For work further west in Paradise, see Fence Installation in Paradise. You can also reach our home page for an overview of the seven trades we cover.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Henderson

Fence installation is the process of setting posts in the ground, building or hanging fence panels between them, and installing gates, all done to a measured layout and a code-compliant height. It includes site prep, utility locating, footing work, and cleanup. For a residential job in Henderson, the entire process typically takes two to five days from the first dig to the final walkthrough, depending on the length of the run and the soil.
A standard residential fence run takes two to five days. Chain link and aluminum go faster because panels arrive pre-assembled; wood and vinyl picket fences take longer because every picket is set individually. Caliche ground can add a day if we have to break it, and we’ll tell you upfront if we expect that. Call (833) 954-5920 and we’ll give you a real schedule for your property, not a best case.
Fence installation in Henderson runs $3,500 to $9,000 for most residential jobs, with vinyl and wood at the low-to-mid end and aluminum at the higher end. Linear feet drives the number more than anything else, followed by material, gate count, and whether an existing fence needs removal. Call (833) 954-5920 for a written quote, and bring a competitor’s estimate if you have one; we’ll review it line by line for free.
Yes, we install and service both Atlas and Boral fence products. Our technicians are familiar with how Atlas powder coat holds up under Henderson sun and where Boral composite panels need extra bracing on a sloped run. If your property has either brand already, we can repair or replace sections with matching material rather than ripping out the whole fence. Call (833) 954-5920 to talk through what you have.
We handle urgent fence repair after storm damage or a vehicle strike, and a live person answers our phone around the clock. If a fence is down along a pool or property boundary, call (833) 954-5920 and we’ll talk through temporary securing options while we schedule the repair. For routine work, we schedule during normal service hours with a written price before we start.
Every fence installation is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right within the first year. The guarantee is backed by The Haven Standard and printed on every quote, not buried in an asterisk. You also get the manufacturer warranty on the fencing material itself, and we’ll walk you through the terms before you sign. If anything fails in that first year, call (833) 954-5920 and we’ll come out.
Clear the fence line of furniture, planters, and anything within about three feet of the post locations, and make sure we can reach the side yard with a wheelbarrow. Mark any irrigation lines or landscape lighting you know about, since 811 locates utilities but not private lines. Keep pets indoors on dig day for their safety. If you have an HOA, send us the fence design approval before we order material; that one step avoids the most common delay.
Schedule Your Fence Installation Service in Henderson Today
Call (833) 954-5920 to schedule a free fence installation estimate in Henderson. You’ll get a written flat price with a written scope before any work starts, an honest read on your soil and property line, and a documented photo record of the finished job. If you already have a competitor’s written quote, bring it and we’ll review it line by line at no charge. No obligation, no pressure, just a number you can compare.
Written by the team at Rowan Construction Group Henderson.












