







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Henderson, NV
Cabinet installation in Henderson typically runs $4,200 – $9,800 for a standard 10×10 kitchen in semi-custom stock, while refacing the same footprint usually lands between $2,400 and $6,100 depending on door style and veneer grade. The number that matters is the one written on the quote before anyone touches a hinge. We do that here, the same way we do on every Kitchen Remodeling in Henderson project, because under Clause 1 of the Haven Standard the price is written before work starts. That applies whether you’re swapping out 1990s oak in Green Valley or refacing a builder-grade box in Anthem.
Cabinet work sits under the larger Kitchen Remodeling scope, and it’s the piece most homeowners underestimate. We’re Rowan Construction Group Henderson. Our technicians have up to 19 years of experience, they’re background-checked and uniformed, and every visit includes a documented photo record you keep. Call (833) 954-5920 for a free estimate. A live person answers 24/7.
Key Takeaways
- Cabinet installation in Henderson: $4,200 – $9,800 (10×10 kitchen, semi-custom).
- Refacing: $2,400 – $6,100, or roughly 40 – 60% of full replacement.
- Flat written price before work starts. No change proceeds without a signed change order.
- 365-Day Done Right Promise on every install and reface.
- Free Second Opinion on any competitor’s written estimate, line by line.

When You Need Cabinet Installation & Refacing
Most Henderson cabinet calls land in one of these buckets. If yours does, the conversation starts with a measurement, not a sales pitch.
- Soft-close hinges are failing. On cabinets installed during the big Henderson build-out between 2015 and 2022, we regularly see the original hinges loosen after repeated dry-season cycling. The wood swells in monsoon humidity and shrinks in the dry months, and the screw holes give out first.
- Doors are warped or the finish is peeling. Thermofoil doors in west-facing kitchens around Seven Hills and McCullough Hills take an afternoon of direct sun that the original finish wasn’t spec’d for. The film lifts at the edges.
- You’re changing the layout. Moving the range, adding a pantry, or opening the wall to the living room means new boxes, not refaced ones. That’s an installation job.
- You want a new look without a full tear-out. Refacing keeps your existing frames and replaces doors, drawer fronts, veneer and hardware. It’s a real option when the boxes are solid and only the visible face is tired.
- Water damage under the sink. We see this in Green Valley homes where a supply line has been weeping for months. Refacing won’t fix a soft box. We tell you that before you sign.
- You’re selling or refinishing before a move. Refacing at $2,400 – $6,100 is the lower-risk spend when the goal is a presentable kitchen, not a new one.
Our Cabinet Installation & Refacing Process
Every job runs on the same sequence. The order is the reason projects finish within a few percent of the agreed cost.
- Measure and document. We measure the existing footprint, check plumb and level on the walls, and photograph the current boxes, substrate and plumbing. That photo record goes to you.
- Write the price. You get a flat written price with a written scope and a written warranty before any work starts. “Call for a quote” isn’t how we operate. We also offer a Free Second Opinion on any written estimate you’ve already received, reviewed line by line at no charge.
- Order the material. We source across fifty-plus vetted brands, so the quote reflects honest numbers. KraftMaid and Wellborn are the two cabinet lines most Henderson homeowners land on, and both hold up well in this climate. If a refacing veneer or door style isn’t available in the grade you want, we say so at this stage, not mid-install.
- Protect and demo. Floors covered, countertops protected if they’re staying, old doors and hardware removed and labeled. If the boxes are going too, we pull them clean.
- Install or reface. New boxes leveled and shimmed to the wall, or existing frames prepped, veneered and fitted with new doors and drawer fronts. Hardware drilled at a consistent height, because uneven pulls are the first thing a buyer notices.
- Walk-through and photo record. You see the finished work, the documentation, and the warranty in writing. If something isn’t right, the 365-Day Done Right Promise covers it.

Cabinet Installation & Refacing Pricing in Henderson
Here’s the honest range. These are real numbers for a 10×10 kitchen in the Henderson market, not a teaser.
| Scope | Typical Range | What Drives the Number |
|---|---|---|
| Refacing – laminate veneer, stock doors | $2,400 – $4,200 | Door count, linear feet of veneer, hardware grade |
| Refacing – wood veneer, semi-custom doors | $4,200 – $6,100 | Species, door style, soft-close hardware, drawer front count |
| Installation – stock/semi-custom boxes | $4,200 – $7,500 | Cabinet line, box count, layout changes |
| Installation – custom or layout change | $7,500 – $9,800+ | Custom millwork, moving plumbing or gas, wall opening |
| Under-sink repair or substrate replacement | $400 – $1,100 | Water damage extent, subfloor involvement |
What moves the price most: box count and cabinet line, whether the layout changes (moving a sink or gas line means a plumber and permits), the door style and finish, and whether the countertops come off and go back on. Refacing is cheaper because you’re not paying for boxes, demolition or new counter templating in most cases.
Your quote is a flat written price with a written scope and a written warranty. No change proceeds without a signed change order. That’s the administrative discipline that keeps the final number within a few percent of the one you agreed to. Call (833) 954-5920 for a free estimate and a number you can screenshot.
Why Henderson Cabinets Are Different
This valley is hard on cabinetry. Summer afternoons push past 110°F, and the dry air pulls moisture out of wood doors and drawer fronts. Then monsoon season arrives and the same doors swell. West-facing kitchens in Anthem and MacDonald Ranch see the most sun, and thermofoil and laminate faces take the brunt. When we spec a refacing veneer or a new box, we’re choosing for that cycle, not for a catalog photo.
Water is the other factor. Henderson’s water runs hard, and aging supply lines under sinks show it. We check the substrate and the plumbing before we quote refacing, because covering a soft box is a waste of your money. If the frames are sound, we reface. If they aren’t, we install. We tell you which and why, in plain terms.
If your cabinets are part of a larger job, the same crew handles the bathroom remodeling and home additions that often follow, and the same written price discipline applies across all seven trades.
FAQs – Cabinet Installation & Refacing
Is it cheaper to reface or replace cabinets in Henderson?
Refacing is almost always cheaper, usually 40 – 60% less than full replacement in Henderson, because you keep the existing boxes and skip demolition. Refacing a standard 10×10 kitchen runs $2,400 – $6,100, while installation runs $4,200 – $9,800. Refacing only wins if the frames are solid and the layout works. We check both before we quote. Call (833) 954-5920 for an exact number. Estimates are free.
How long does cabinet refacing take?
Most Henderson refacing jobs take 2 – 4 working days once material arrives, and full cabinet installation runs 3 – 6 days depending on box count and whether the layout changes. We give you the day range in writing before we start, and it’s on the same quote as the price. Call (833) 954-5920 to schedule a measurement.
Do you handle the countertops too?
Yes. Cabinets and countertops move together, so we quote both when the job calls for it. We source Cambria and Caesarstone quartz, and we templatize after the boxes are set, not before. That sequencing is why the counter sits flush. Ask about counter pricing when we’re on site for the cabinet estimate.
What brands do you install?
KraftMaid and Wellborn are the cabinet lines most Henderson homeowners choose with us, and both hold up well in this climate. We also source across fifty-plus vetted material brands, so we can spec a refacing veneer or a stock box that fits your budget and your room. We name what goes into the quote, not a range of “premium options.”
Book a Cabinet Estimate in Henderson
If your cabinets are failing, tired or in the way of a layout change, the next step is a measurement and a written number. Rowan Construction Group Henderson gives you a flat price with a written scope and a written warranty before any work starts, a Free Second Opinion on any estimate you already have, background-checked and uniformed technicians, and the 365-Day Done Right Promise behind every install and reface. Call (833) 954-5920 for a free estimate. A live person answers 24/7, and you’ll get a photo record of what we find and what we do.
Written by the team at Rowan Construction Group Henderson, serving Henderson.


