







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Henderson Homeowners Choose Toto Construction
Rowan Construction Group Henderson provides independent Toto construction and service in Henderson, working daily with Drake, Vespin II, Ultramax, and Washlet fixtures. Our Toto work starts with the parts a generic plumber skips: OEM fill and flush valves, correct wax ring and flange seating, and Washlet components matched to your seat model. We’re an independent Toto service provider, not affiliated with or authorized by Toto, so our credibility comes from the Henderson bathrooms we’ve opened, reset, and tiled back. Call (833) 954-5920 for a free written estimate.
Why Trust Rowan Construction Group Henderson for Your Toto Construction?

Our technicians have up to 19 years of experience and work on Toto fixtures the way the manufacturer specifies: OEM fill valves, OEM flush valves, OEM gaskets, and OEM wand assemblies wherever those parts are available. Where a part is non-critical trim (a hinge, a seat buffer, a bolt cap), we’ll source a quality aftermarket equivalent and tell you so in writing on the quote. Nothing is substituted quietly.
That matters for warranty. Toto’s coverage typically holds when OEM parts go back in and installation follows the rough-in and torque specification. A cracked bowl from an over-tightened closet bolt or a Washlet installed against a non-GFCI outlet are the kinds of problems that void coverage. We flag those on the written scope before the work begins, not after.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. No change proceeds without a signed change order. Our crews are background-checked and uniformed, a live person answers calls 24/7, and every visit includes a documented photo record as standard. Henderson homeowners get the same terms on a $3,500 tub-to-shower conversion as they do on a full bath remodel.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Henderson
Henderson’s hard water and slab-on-grade bath layouts make certain Toto failures predictable. Here’s what we see most.
- Washlet wand scale and clogging (C100/C200). Mineral scale builds up inside the self-cleaning wand and diverts the spray. On C100 and C200 seats, that shows as a weak or misdirected stream on one side. Left alone, the scale hardens and stresses the wand motor. Descaling and wand replacement usually solve it before the motor fails.
- Wax ring and flange leaks at the floor. A Drake two-piece or Drake II set on an older flange compresses the wax ring unevenly, and water seeps under the tile. Over a slab, that moisture wicks into the subfloor and adjacent drywall, and a $400 repair can turn into a $14,000 – $45,000 kitchen-adjacent bathroom remodel if it reaches a partition wall. We check the flange and subfloor before we re-set any Toto bowl.
- Skirted-bowl footprint doesn’t match the new rough-in. A Vespin II skirted toilet has a fixed footprint that hides the trapway. When a Henderson homeowner converts a tub to a shower or reroutes the drain, the skirted base can no longer cover the old flange cut. That’s a layout problem, not a toilet problem, and it has to be planned before demo.
- In-wall carrier failure and supply-line access. Wall-hung Toto installations hide the carrier and supply behind tile. When the carrier’s flush mechanism or supply valve fails, the fix usually means opening a tile field. We plan the access panel or tile break into the scope so you know what you’re paying for.
- Ultramax one-piece seating and closet-bolt torque. The Ultramax one-piece bowl is heavier and less forgiving than a two-piece. Over-torquing the closet bolts, or re-setting it on a worn flange, cracks the base or leaves it rocking. We inspect the flange, replace the ring, and torque to spec.
Toto Parts & Our Repair-vs-Replace Approach

We use Toto OEM fill valves, flush valves, gaskets, and wand assemblies where those parts are available, and quality aftermarket parts only for non-critical trim like seat buffers and bolt caps. We don’t claim to stock Toto parts locally; each job is sourced to the specific model and series, and the part number appears on the written quote. If Toto has discontinued a part for an older series, we say so and offer the closest OEM-compatible option or the replacement path.
Repair is the honest call for valve failures, seal failures, and Washlet wand scale. Replacement is usually the honest call for a cracked bowl, a failed in-wall carrier that can’t be serviced without major demolition, or a toilet whose rough-in no longer matches the finished bathroom layout. Same rule both ways: we show you the condition, put the recommendation in writing, and let you decide.
Call (833) 954-5920 for a free written estimate on your Toto repair or bath project.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We pull the toilet or open the access, photograph the flange, subfloor, supply line, and carrier, and confirm the exact Toto model and series. You get the photo record in writing.
- 2
Written scope and price. Under Clause 1 of the Haven Standard, you see a flat written price and written scope before any tool comes out of the case. No change proceeds without a signed change order.
- 3
Repair or install. OEM parts installed to Toto spec, Wax ring and flange repaired or replaced, Washlet reconnected to a GFCI-protected circuit if it isn’t already.
- 4
Test and document. We cycle the flush, test the Washlet spray pattern and seat heat, check for leaks at the base, and photograph the finished install for your record.
- 5
Warranty. Our 365-Day Done Right Promise covers the work. If it’s not right, we make it right under The Haven Standard, with the terms printed on the page and a warranty document in hand.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Henderson

We service and install the full Drake family (including the Drake II), the Vespin II skirted toilet, the Ultramax one-piece, and the Washlet C100 and C200 seats. We also handle the bath scope those fixtures live inside: tub-to-shower conversions, walk-in shower installs, and full bath remodels. The Toto fixture choice affects rough-in, drain location, and electrical, so we plan the whole bathroom around the model, not the other way around.
On a tub-to-shower conversion in Henderson, a Vespin II or Ultramax reinstall has to land on the new subfloor after the tub comes out. We plan the drain relocation, the floor patch, and the tile line at the same time so the toilet doesn’t come back to a cut-out that no longer matches. For walk-in showers, we set the Toto seat on a GFCI circuit and confirm the supply line clears the new shower wall. For full remodels, we tie the Toto fixture scope to the vanity, tile, and lighting schedule so one trade doesn’t undo another.
The same planning applies to Washlet installs on a Drake: outlet location, GFCI protection, and cord routing come before the seat goes on.
We Also Service These Brands
Rowan Construction Group Henderson services KraftMaid cabinets, Kohler fixtures, GAF roofing, and PGT windows alongside Toto. That matters on a bathroom remodel where the vanity cabinet, the sink, and the toilet all have to fit the same footprint. We quote the whole scope with one written price so the brands work together instead of against each other.
FAQs – Toto Construction Service in Henderson
No. We’re an independent Toto service provider, not affiliated with or authorized by Toto. Our expertise comes from daily work with Drake, Vespin II, Ultramax, and Washlet fixtures in Henderson homes, not a manufacturer credential.
Yes, we use Toto OEM fill valves, flush valves, gaskets, and wand assemblies wherever those parts are available, and quality aftermarket parts only for non-critical trim. The specific part number appears on your written quote. Call (833) 954-5920 for a free estimate.
A wax ring and flange repair is typically a half-day job; a Washlet wand descale or replacement is usually under two hours; a tub-to-shower conversion with a Toto re-set runs several days across demo, plumbing, tile, and re-set. We put the timeline in the written scope so nothing is promised on the fly.
We cover the Drake and Drake II two-piece toilets, the Vespin II skirted toilet, the Ultramax one-piece, and the Washlet C100 and C200 seats. If your model isn’t on that list, call and we’ll confirm coverage before scheduling.
Not if the work follows Toto’s install spec with OEM parts, which is what we do. The common warranty risks are non-OEM internal parts, an over-torqued closet bolt cracking the base, or a Washlet on an unprotected outlet. We flag all three in writing before work starts.
Here are our current Henderson ranges. A single Toto repair is priced against the line it belongs to.
| Service | Henderson Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Shower Replacement | $3,000 – $8,500 |
| Backsplash Installation | $800 – $2,500 |
Call (833) 954-5920 for an exact written quote. Estimates are free, and we’ll bring a second-opinion review of any competitor estimate at no charge.
Book Your Toto Service in Henderson, NV
Rowan Construction Group Henderson handles Toto repair, Washlet service, and the bath projects around them with a written price before work begins and a 365-Day Done Right Promise behind the result. Call (833) 954-5920 for a free estimate, or text us and we’ll confirm your appointment. Henderson homeowners get the same terms on every trade: documented, priced, and signed.
Written by the team at Rowan Construction Group.












