A Rowan company - serving Henderson, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
K
Kohler · Henderson

Kohler Bathroom Remodeling in Henderson, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Henderson
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Bathroom Remodeling in Henderson: What to Know First

We provide independent Kohler bathroom remodeling in Henderson, with typical projects running $9,000 – $28,000 and taking three to six weeks from demolition to final walkthrough. Every job starts with a flat written price and a written scope before a single tile is pulled, and no change proceeds without a signed change order. Our technicians have up to 19 years of experience, and we’re an independent Kohler service provider, not affiliated with or authorized by Kohler.

Call (833) 954-5920

This page is for Henderson homeowners who already have Kohler fixtures, or want them, and want to understand what a Kohler-specific remodel actually involves before they call anyone. The number is (833) 954-5920, and estimates are free.

How Kohler Products Fail – and How We Fix Them

Kohler builds good fixtures. But a bathroom in Henderson is a hard environment for anything made of ceramic, brass, and silicone, and the failures we see on Kohler jobs are specific enough to name.

  • Memoirs and Devonshire toilet fill valves that run or hiss. The Fluidmaster-style fill valves Kohler uses on these lines are reliable, but Henderson’s hard water leaves mineral film on the seal, and the valve dribbles long before it fails outright. You hear a refill cycle at 2 a.m. that stops on its own. We replace the fill valve and inspect the flush tower rather than swapping the whole toilet.
  • Undermount Cimarron and Wellworth basins separating from the counter. The silicone bead under an undermount Kohler basin degrades faster than the sink itself, especially in bathrooms with a shower running daily. The basin sags a few millimeters and water finds the gap. We reset the basin on a proper clamp and re-seal with a mold-resistant silicone rated for wet areas.
  • Memoirs shower valve cartridges that grow stiff. The ceramic cartridge in a Kohler Memoirs-pressure-balance valve stiffens when sediment from Henderson’s water supply works into the mechanism. The handle gets hard to turn, then the temperature control drifts. We pull the cartridge, flush the valve body, and decide between an OEM Kohler replacement and a quality aftermarket cartridge based on what the valve body looks like.
  • Cast-iron Kohler tubs with failing overflow gaskets. A cast-iron Villager or Memoirs tub lasts decades. The rubber overflow gasket behind the drain does not, and a slow leak shows up as a stain on the ceiling below or a soft spot in the subfloor. We pull the overflow, replace the gasket and drain shoe, and check the subfloor before we set anything back.
  • Tile and grout around Kohler shower receptors. Where a Kohler cast-iron or acrylic receptor meets the tile wall, the caulk joint takes the brunt of daily showering and Henderson’s dry-then-wet cycle. Water gets behind the tile, and the substrate softens. We remove the failing caulk, check the waterproofing membrane behind the tile, and rebuild the joint with a backer rod and a flexible sealant rather than grout.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our Kohler Bathroom Remodeling Process

Every Kohler job follows the same six steps, whether it’s a vanity swap or a full gut.

  1. 1
    Diagnostics. We inspect every Kohler fixture in the room, note model numbers, and photograph the condition of the substrate, the tile membrane, and the plumbing rough-in. You get a written summary before we quote.
  2. 2
    Written price and scope. Under Clause 1 of the Haven Standard, you get a flat written price and a written scope before any work starts. The fixture models, tile selections, and labor are all line-itemed.
  3. 3
    Parts decision. For each Kohler component, we recommend OEM or quality aftermarket based on warranty status and condition. If the fixture is under Kohler warranty, we use OEM parts so the warranty stays intact.
  4. 4
    The work. Demo, rough-in, waterproofing, tile, and fixture install happen in sequence with a photo record at each stage. Any change to the scope stops work until a change order is signed.
  5. 5
    The test. We run every fixture, check for leaks at every joint, and verify the shower pan holds water before we call it done.
  6. 6
    The guarantee. Every job is covered by the 365-Day Done Right Promise. If it isn’t done right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Kohler Bathroom Remodeling Costs in Henderson

A tile setter installing wall tile in a shower

Here are the ranges we quote most often for Kohler-focused bathroom work in Henderson:

Project Typical Range
Full bathroom remodel (Kohler fixtures throughout) $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation (Kohler receptor and valve) $4,500 – $12,000
Tub-to-shower conversion (Kohler cast-iron tub out, shower in) $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation (Kohler or comparable) $800 – $3,000

What moves the price: whether the valve body gets replaced or just the cartridge, whether the subfloor needs repair, tile selection, and whether you’re keeping the existing layout. A vanity swap is a one-day job. A full remodel with new waterproofing and a Kohler cast-iron receptor runs toward the top of the range.

Call (833) 954-5920 for an exact quote. Estimates are free, and you’ll have a written price before anyone picks up a tool.

Why Henderson Homeowners Call Rowan Construction Group Henderson for Kohler Work

We’ve delivered more than 4,000 projects since 2007, every one with a written price before work started and a documented record when the crew left. That record matters on a Kohler job because you can see exactly what was replaced and why. Our technicians are background-checked and uniformed, and a live person answers calls 24/7. On a Kohler job, they know the difference between an OEM cartridge and a knockoff, and they’ll tell you when the cheaper part is the right call and when it isn’t.

We also work across more than fifty vetted brands, including KraftMaid, GAF, PGT, and Master Halco, so a Kohler remodel can bring in the right cabinet, window, and exterior hardware without a separate contractor. And if you have a written estimate from another contractor, we’ll review it line by line at no charge through our Free Second Opinion. Bring the quote and call (833) 954-5920.

FAQs

A new roof with clean valleys and new flashing

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver pool deckAn open kitchen and dining area after a remodelA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Henderson

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Henderson team

A local vetted partner works across Henderson and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 954-5920
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Rowan Construction Group Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch