







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Henderson, NV
A tub-to-shower conversion in Henderson typically costs $3,800 to $9,500, takes three to six working days, and replaces a dated alcove tub with a walk-in shower sized to the same footprint. Most conversions happen because someone in the house has stopped stepping over a 14-inch tub wall, or because a 1990s garden tub is eating floor space nobody uses. We convert tubs to showers across Henderson, and we do it the way we do every job: written price before demo, signed change order before anything extra, photo record when we leave. Call (833) 954-5920 for a free estimate. If you’re weighing a bigger scope, our Bathroom Remodeling team handles full-gut remodels too.
Our technicians have up to 19 years of experience, and most of that time has been spent inside Henderson bathrooms – which matters more here than in most cities. Henderson’s water runs hard, roughly 12 to 16 grains of hardness depending on your neighborhood, and that calcium load is what kills shower valves, fogs glass, and eats the grout lines in older tub surrounds. A conversion is a chance to replace the hardware that’s already scaling up.
Key Takeaways
- A tub-to-shower conversion in Henderson runs $3,800 to $9,500 for most alcove bathrooms.
- Three to six working days on site, from demo to first shower.
- Waterproofing and drain relocation are the two cost drivers most homeowners don’t anticipate.
- Every conversion includes a documented photo record of the substrate and membrane before tile goes up.
- Written price and written scope before demo starts – no exceptions under Clause 1 of the Haven Standard.

When You Need Tub-to-Shower Conversion
Most of the conversions we do in Henderson start with one of these situations:
- Someone in the house can’t safely step over the tub wall. A 14-inch tub apron is a real fall risk for an aging parent or anyone recovering from knee or hip surgery. A curbless or low-curb shower with a bench and grab bar resolves it without a full bathroom gut.
- The tub is never used. In Henderson’s two-story homes, the hall bath often has a tub nobody has filled in years. Converting it to a walk-in shower gains usable floor and turns dead space into the shower everyone actually wants.
- The tub surround is failing. Cracked grout, soft drywall behind the tile, or a surround that’s pulling away from the wall. Henderson’s hard water accelerates this – mineral scale gets into the grout and holds moisture against the substrate. Once the drywall behind the tile is soft, a patch won’t hold.
- The tub drains slowly no matter what you snake. Older cast-iron drains scale shut from the inside over decades. A conversion is the right time to replace the trap and drain assembly while the floor is open.
- You’re prepping the house for sale. Buyers in the Henderson market read a walk-in shower as a modern bath; a 1980s garden tub reads as a project. It’s one of the higher-return updates you can make before listing.
- The existing shower valve is a two-handle. Replacing it with a pressure-balance or thermostatic valve during a conversion is a small add-on that prevents scalding and makes the shower usable.
Our Tub-to-Shower Conversion Process
Here’s the sequence we follow, start to finish. Every step is documented, and nothing extra happens without a signed change order.
- Measure and quote. We measure the alcove, check the drain location, and look at what’s behind the surround. You get a flat written price with a written scope and warranty before anyone picks up a tool. If something unexpected shows up in the wall, we stop and price the change in writing. That’s the whole point of Clause 1 of the Haven Standard.
- Demo and inspection. Out comes the tub, surround, and any failing drywall. We inspect the framing and the subfloor and photograph all of it. If the subfloor shows water damage or the framing is soft, that goes in the photo record and becomes a priced line item, not a surprise.
- Rough-in. Drain relocation if the new pan needs it, new valve and trim, and any supply-line updates. This is the step that separates a conversion that lasts from one that leaks in year three.
- Waterproofing. A bonded waterproofing membrane over cement board, with seams and corners taped and sealed. This is the step most homeowners can’t see and the one that matters most. We photograph the membrane before any tile goes up, so you have proof of what’s underneath.
- Tile, glass, and trim. Wall tile, pan tile, a niche if you want one, and tempered glass. We use Boral or Atlas tile products where the budget calls for them – real names, real specs, not “premium tile.”
- Final walkthrough and documentation. Test the drain and valve, photograph the finished work, hand you the written warranty, and leave the bathroom cleaner than we found it. The 365-Day Done Right Promise covers anything that isn’t right, backed by the Haven Standard.

Tub-to-Shower Conversion Pricing in Henderson
Here’s what a conversion actually costs in the Henderson market. These are ranges – the exact number depends on the six factors below, and you get that number in writing before demo.
| Line Item | Typical Range |
|---|---|
| Basic conversion (same footprint, acrylic pan and surround) | $3,800 – $5,400 |
| Mid-range tile shower with new valve | $5,500 – $7,800 |
| High-end tile, custom glass, niche, bench | $7,500 – $9,500 |
| Drain relocation (per move) | $400 – $900 |
| Water-damaged subfloor or framing repair | $300 – $1,200 |
| Curbless conversion (requires floor lowering) | add $1,200 – $2,500 |
What drives the price up:
- Drain location. If the new pan’s drain isn’t in the same place as the old tub’s, the floor has to come up and the trap has to move. That’s a real cost, and we price it as a line item.
- What’s behind the surround. Drywall that’s been wet is common in Henderson homes built in the 1980s and 1990s. Replacing it is part of doing the job right.
- Curbless design. A no-threshold shower requires lowering the floor structure or building up the rest of the bathroom to match. It’s the right answer for aging-in-place, and it costs more.
- Glass. Frameless tempered glass runs several times the cost of a framed enclosure. Boral and Atlas tile lines sit at different price points too.
- Valve and fixture brand. A name-brand pressure-balance valve and trim is worth the extra; it’s the part you touch every day and the part that fails first in hard water.
- Permit. Most conversions in Henderson require a plumbing permit. We handle the paperwork as part of the project – it’s included in the written scope, not an add-on.
Want a second set of eyes on a quote you already have? Bring it in. Our Free Second Opinion reviews any written estimate line by line at no charge.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Henderson?
A tub-to-shower conversion in Henderson typically runs $3,800 to $9,500, depending on tile, glass, drain location, and whether there’s water damage behind the surround. The written price you get from us is a flat number with a written scope, not a range, and no work proceeds on a change until you’ve signed the change order.
How long does a tub-to-shower conversion take?
Most conversions take three to six working days on site, from demo to first shower. Simple acrylic pan-and-surround jobs land on the short end; tile with a niche, bench, and frameless glass land on the long end. Material lead times can add a week or two depending on the tile and fixture selections.
Do I need a permit for a tub-to-shower conversion in Henderson?
Yes, most tub-to-shower conversions in Henderson require a plumbing permit because the shower valve and often the drain are being changed. We handle the permit and inspection as part of the written scope. Skipping it can complicate a future sale and leaves you without a documented inspection of the waterproofing and rough-in.
Can you convert a tub to a curbless shower?
Yes, and it’s one of the most common requests we get from Henderson homeowners planning to age in place. A curbless shower requires lowering the floor structure or building up the rest of the bathroom floor to match, which adds $1,200 to $2,500 to the project. It’s the safest option for anyone with mobility concerns, and it looks clean and modern.
Is it cheaper to repair the tub or convert to a shower?
If the existing tub and surround are structurally sound and the only problem is cosmetic, a repair or refinish is cheaper – typically a few hundred dollars. But once the surround is failing, the drywall is wet, or the tub is a safety concern, a conversion is the better spend. A refinish over failing substrate peels within a couple of years. We’ll tell you honestly which side of that line your bathroom sits on.
Can you do the conversion while we’re living in the house?
Yes, and that’s how almost all of our Henderson conversions run. We cover floors and adjacent areas, keep the work area contained, and let you know each day what’s happening. If it’s your only bathroom, we plan the schedule so you’re without a usable shower for the shortest stretch possible – usually just the tile-and-cure window.
Ready to get the number in writing? Call (833) 954-5920 for a free estimate. We’ll measure your bathroom, review the options, and hand you a flat written price with a written scope and warranty before anything else happens. If you’ve got another contractor’s quote, bring it – the second opinion is free either way.
Written by the team at Rowan Construction Group Henderson, serving Henderson.


