A Rowan company - serving Henderson, NV
A living room with a wall of new windows and a sliding glass door

How Long Does Windows & Doors Take? Timelines and What to Expect

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Henderson

Last updated November 18, 2026

A new front entry door with glass sidelights
A new bay window with a cushioned seat
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

How Long Does Windows & Doors Take? Timelines and What to Expect

Sign a window replacement contract in May and you might reasonably expect new glass by June. Custom-sized Andersen 400 Series windows, however, carry a 6 – 10 week lead time straight from the manufacturer, a fact printed in the product literature and routinely left out of contractor timelines. The installation itself might take three days. Getting to that day takes months. This guide breaks down total elapsed time from signed contract to closed permit across four phases, with realistic Henderson windows and doors timelines for each, manufacturer lead times for Milgard, Andersen and PGT, and the milestone schedule you should request in writing before you sign anything.

Call (833) 954-5920

Quick Answer

A typical window and door replacement in Henderson runs 8 – 14 weeks from signed contract to final inspection. Installation itself is usually 1 – 3 days for a standard whole-home window package. The rest of the timeline is material lead time (2 – 12 weeks depending on stock, custom or impact-rated), permit approval through Henderson Building & Safety (usually 1 – 3 weeks for a standard replacement permit), and inspection scheduling.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

The Four Phases of a Window and Door Timeline

Every window and door project moves through the same four phases. Contractors who quote you a single number for “install time” are only describing phase three, which is often the shortest part of the whole job.

  1. Material order and lead time. Starts the day the deposit clears and the final measurements are confirmed. This is the longest phase in most Henderson projects and the one with the least flexibility once an order is placed.
  2. Permit application and approval. Filed with Henderson Building & Safety, usually in parallel with the material order. Standard replacement permits typically clear in 1 – 3 weeks when documentation is complete.
  3. Installation. The visible phase. One to three days for a typical whole-home window package, sometimes longer with stucco exteriors and two-story work.
  4. Final inspection. Scheduled after installation is complete. In Henderson, expect a scheduling window of a few business days to two weeks depending on the city’s current inspection load.

Add those phases together and you get total elapsed time. For a stock Milgard window package, the answer might be 6 – 8 weeks. For a custom Andersen or impact-rated PGT order, 14 weeks or more is realistic, and no amount of contractor enthusiasm shortens a manufacturer’s production queue.

Material Lead Times: Stock vs. Custom vs. Impact-Rated

The single biggest variable in any windows and doors schedule is which product you order. We’ve seen homeowners approve a window style without realizing the model they picked adds four weeks to the timeline compared to the in-stock alternative.

  • Milgard stock sizes: 2 – 3 weeks. Standard dimensions and common finishes are typically stocked or fast-tracked through regional distribution.
  • Milgard custom: 5 – 7 weeks. Non-standard sizes, specialty glass packages and uncommon colors add production time.
  • Andersen custom: 6 – 10 weeks. The 400 Series and 200 Series lines are built to order, and the manufacturer discloses this lead time in the product literature.
  • PGT impact-rated: 8 – 12 weeks. Impact glass is produced on a separate line and the testing and certification documentation adds to the cycle. In Henderson, impact-rated glazing matters less than in coastal markets, but some homeowners still spec it for noise reduction or design reasons.

Doors follow similar curves. A Sterling steel entry door in a standard size moves faster than a custom wood door with a sidelight configuration. Grohe and other hardware brands typically ship independently of the door slab, which can add a week if the hardware is ordered late. When we write a quote, the lead time for each line item is stated on that line, not lumped into a single “approximately 4 – 6 weeks” for the whole job.

Henderson Building & Safety: Permit Processing and Requirements

Window and door replacement in Henderson generally requires a permit when the work involves changing the size of an opening, replacing a door in an exterior wall, or changing the structural framing. Like-for-like window swaps in the same opening sometimes qualify for simplified review, but the safe assumption is that you’ll need one.

Henderson Building & Safety typically processes a complete window replacement application in 1 – 3 weeks. Incomplete applications are the main cause of delay, and the documentation required before issuance usually includes:

  • Completed permit application with the property address and scope description
  • Manufacturer product data sheets and specifications for the windows and doors being installed
  • A site plan or elevation drawing showing each unit being replaced
  • Window and door schedule listing sizes, U-factor, SHGC and labeling for each opening
  • Contractor license information on the application
  • Any required structural engineering if openings are being resized or lintels are being altered

The U-factor and SHGC numbers matter in Henderson because of cooling loads. A west-facing window with the wrong solar heat gain coefficient will bake a room in July, and reviewers will look at the specs before issuing. If your contractor can’t produce the manufacturer’s data sheet on request, the permit application stalls. Line-item lists the permit number in writing once issued, and it stays visible on the project record.

Installation Day Reality: How Many Windows Per Day

A two-person crew installs roughly 6 – 10 standard windows in an eight-hour day, depending on the opening type, the exterior finish and whether the existing units come out cleanly. That’s the honest number. It’s also the number a contractor should be willing to put on a schedule.

The variables that move that 6 – 10 figure up or down:

  • Second-story work: Ladders, lifts and fall protection slow the pace. Upper-floor windows often run closer to 4 – 6 per day for a small crew.
  • Stucco exterior: The most common exterior in Henderson. Cutting back stucco, installing flashing and re-stuccoing correctly takes time the window package alone doesn’t capture.
  • Steel lintels: Some older Henderson homes have steel lintels above the openings. If the existing lintel is corroded or improperly bearing, it has to be addressed before the new window goes in, and that’s a change to the scope.
  • Door replacements: An entry door is a half-day to a full day by itself once you account for frame, threshold, weather seal and hardware. Sterling and similar steel doors tend to move faster than custom wood.

A whole-home window replacement on a Henderson single-story typically lands in 1 – 3 days. A two-story stucco home with doors scattered through the package may run 3 – 5 days. The installation phase is where optimism goes to die if the crew count on paper doesn’t match the crew on site.

What Slows an Installation Down

Site conditions are the least predictable part of a windows and doors timeline, and they’re the reason experienced contractors pad installation days rather than shave them. A few patterns are consistent in Henderson.

First, stucco and the weep screed. Removing an old window damages the stucco surround, and repairing it correctly means flashing, building paper and a new coat that needs to cure. A crew that patches stucco haphazardly will leave water intrusion waiting to happen. That repair takes time and belongs in the schedule.

Second, foam or aluminum frame condition. Older Henderson homes sometimes have aluminum-framed windows with sealant that has failed. When the frame comes out, the rough opening underneath is rarely clean, and reframing takes an hour or two per opening you didn’t budget for.

Third, the doors. Interior and exterior door replacements often surface thresholds that are rotted, subfloor that needs repair, or framing that isn’t square. None of that is a window problem, but it belongs on the same schedule. Under the Haven Standard, no work proceeds on any of these until a change order is signed, which means a surprise in a rough opening causes a pause, not a surprise on the invoice.

Fourth, weather and staging. Installation windows of a few days at a time are manageable, but a crew that has to wait for inspection clearance or another trade (if a door install touches a fence line or driveway approach, which happens more than you’d expect) will lose days. Coordinating trades is part of the schedule, not a surprise contract to ignore. If your project touches the driveway, the Driveway & Pavers in Henderson page covers the site sequencing that matters when those work streams overlap, and the same principle applies to a perimeter fence on the property where a new door install meets the boundary line.

The Milestone Checklist to Request Before Signing

Before you sign a windows and doors contract, ask for a milestone schedule in writing with specific dates. Not “approximately.” Not “roughly.” Dates. Here’s the checklist.

  1. Order placement date – the calendar date the manufacturer order will be submitted, not the week.
  2. Manufacturer lead time – the quoted lead time per line item, in weeks, with the manufacturer’s name attached.
  3. Permit application date – the date the application will be filed with Henderson Building & Safety.
  4. Permit issuance date – a target completion for review, with the understanding that the city controls the actual approval date.
  5. Delivery or staging date – the date materials arrive on-site or in staging, which is a different date from order placement.
  6. Installation start and completion dates – start date, estimated completion date, and the number of crew members assigned.
  7. Final inspection date – the requested inspection date and the name of the person responsible for scheduling it.

A schedule with all seven dates on it is a schedule you can hold a contractor to. A schedule that says “late spring, depending on product availability” is not a schedule. That’s a sentence. If you’re already holding a written estimate from another contractor, we’ll review it line by line at no charge as part of our Free Second Opinion, which is one of the standing offers under the Haven Standard.

A Reasonable Schedule vs. an Optimistic One

Here’s the honest comparison, using a typical Henderson single-family home with 12 windows and one entry door, ordered in stock Milgard sizes in early spring.

  • Optimistic schedule: Permit filed within a week, lead time quoted at “3 – 4 weeks,” install in one day, inspection the following week. Total: about 6 weeks from signature to closed permit.
  • Realistic schedule: Permit filed within a week, review takes 2 weeks, lead time is 2 – 3 weeks from stock, install takes 2 days, inspection scheduling takes 1 – 2 weeks. Total: 7 – 9 weeks from signature to closed permit.

The gap between the two isn’t dishonesty, exactly. It’s that optimistic schedules ignore the inspection scheduling window and assume stock is truly in stock. Custom Andersen windows push the realistic schedule to 10 – 14 weeks. PGT impact-rated orders push it to 14 – 18 weeks. Those numbers are the ones to plan around. A kitchen remodel that touches a window wall, or an addition where new windows are part of the framing, has to sequence the window delivery into the broader build. The Home Additions & ADU in Henderson page explains how that sequencing works on a larger project, and the Rowan Construction Group Henderson home page covers how every project is scheduled around the written price and the signed scope. If a fence is being replaced in the same season, Fence Installation in Henderson has the same discipline applied to a different trade.

Common Mistakes to Avoid

  • Confusing install time with total project time. A three-day installation sounds great until you learn the windows won’t arrive for two months. Ask for total elapsed time from signed contract to closed permit, every time.
  • Assuming “in stock” means delivered. A window can be stocked at the distributor and still take a week to reach your job site. Confirm the delivery date, not the stock status.
  • Skipping the permit application until materials arrive. The two run in parallel. Filing the permit only after delivery means the whole project waits on the city’s review window for no reason.
  • Approving a custom size without confirming the lead time hit. The size you want might cost you 6 – 10 weeks versus 2 – 3. Understand the trade before you sign.
  • Ignoring stucco repair in the scope. In Henderson, a stucco exterior always needs rework around the new window, and a scope that doesn’t mention it will produce a change order.
  • Not asking for the crew count. A “crew” of two and a “crew” of five are different projects. The schedule has to reflect the number of people on site.
  • Accepting “approximately” in the schedule. “Approximately the second week of next month” is not a date. Written schedules should carry dates a homeowner can put on a calendar.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Call a professional when your window and door replacement involves opening sizes that are changing, second-story units, stucco exteriors that need proper flashing and repair, or any scenario where the permit documentation has to be accurate so Henderson Building & Safety can approve it. Call when the existing units are showing fogging (seal failure), water staining at the sill, or drafts around the frame. Call when the original framing hasn’t been touched since the house was built and you’re not sure what’s underneath the stucco. Rowan Construction Group Henderson offers free estimates in Henderson for window and door projects. Every price is written, every scope is written, and every visit is documented with a photo record. Call (833) 954-5920 to schedule yours. Our technicians have up to 19 years of experience on window and door installations.

Frequently Asked Questions

The Bottom Line

A new casement window over a kitchen sink

Windows and doors timelines are mostly about lead time and permits, not installation. A stock window package in Henderson runs 6 – 9 weeks from signature to closed permit. Custom Andersen windows push it to 9 – 14 weeks, and impact-rated PGT runs 14 – 18 weeks. The installation is one to a few days of that total. Ask for a written milestone schedule with seven dated steps before you sign, understand which product line drives the longest phase, and confirm the permit filing date runs in parallel with the material order. That’s the whole schedule. Everything else is noise. Call (833) 954-5920 for a free estimate and a written timeline from Rowan Construction Group Henderson.

Written by the team at Rowan Construction Group Henderson.

Getting started with Rowan in Henderson

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Henderson team

A local vetted partner works across Henderson and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Henderson? Licensed & insured · free written estimates
Call (833) 954-5920
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Rowan Construction Group Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch