Last updated November 18, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
The Complete Bathroom Remodeling Guide for Henderson Homeowners
Moving a toilet six inches sounds like a small favor to a bathroom layout. In most Henderson homes it is a concrete saw job. Slab-on-grade construction runs throughout Green Valley, Anthem, and the older tracts near Downtown Henderson, which means the drain line lives inside the foundation. Rerouting it means cutting concrete, running a permit, hiring a licensed plumber, and putting the slab back together – a $1,500 to $4,000 swing that lands after you’ve already picked tile. This guide puts the three variables that actually set your price on paper before demo: the condition of the plumbing behind the wall, the labor differential on tile, and what triggers a permit. You’ll leave with real Henderson numbers.
Quick Answer
A bathroom remodel in Henderson runs $3,000-$8,000 for fixture replacement only, $10,000-$22,000 for a full cosmetic remodel without moving plumbing, and $20,000-$45,000+ for a full gut-and-reconfigure with a new layout. The biggest cost driver isn’t finish selection – it’s whether you move a fixture, which triggers a permit, a licensed plumber, and often a slab cut.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- What does a bathroom remodel cost in Henderson?
- Do you need a permit for a Henderson bathroom remodel?
- Waterproofing: the most consequential decision in a shower
- Tile, fixtures, and realistic Henderson lead times
- Henderson’s hard water and what it does to your finishes
- Reading the rough-in before you sign anything
- Common mistakes to avoid
- When to call a professional
What does a bathroom remodel cost in Henderson?
Price tracks scope, and scope in a bathroom comes down to how much of the room you tear out and how much you relocate. Here is the breakdown we put on paper before any work starts, using Clark County labor rates and Henderson supplier pricing.
| Scope | Typical Range | What Pushes It High or Low |
|---|---|---|
| Fixture replacement only | $3,000-$8,000 | Like-for-like vanity, toilet, faucet swap. Low end if you keep the existing vanity top and mirror; high end with a new tub and a shower valve replacement, which needs the wall opened. |
| Full cosmetic remodel (no plumbing moves) | $10,000-$22,000 | New tile floor and shower surround, new vanity, new toilet, paint. Low end is a tub-to-shower conversion with standard field tile; high end is large-format porcelain with a linear drain and a freestanding tub on the same drain location. |
| Full gut with new layout | $20,000-$45,000+ | Moving a fixture, adding a second sink, expanding into a closet, or reworking the drain line. Slab cutting, permit fees, and the plumber’s rough-in time drive the top of the range. |
Two variables most guides skip. First, the rough-in behind the wall: a 1990s Green Valley bathroom often has galvanized or early PVC drain lines that need partial replacement once the wall is open, which adds $800-$2,500 depending on how far the corrosion runs. Second, the tile labor rate. Standard 12×24 field tile installs at one rate; a mosaic shower floor or a herringbone wall pattern takes roughly twice the setter’s time, because every cut is a layout decision. That differential can move a tile line item by $2,000 on its own.
For projects that spill into an adjacent room – say the bathroom shares a wall with a planned addition – the same written-price discipline applies across our Rowan Construction Group Henderson home services. You get the number before demo, not after.
Do you need a permit for a Henderson bathroom remodel?
You need a permit whenever you move a fixture location, add or relocate an electrical circuit, or build a new waterproofed shower. You don’t need one to replace like-for-like fixtures, paint, or swap a vanity in the same spot. That’s the line, and it’s worth knowing before a contractor tells you otherwise.
What triggers a permit in Henderson:
- Moving a fixture – toilet, sink, or tub to a new location. This is the one that catches homeowners off guard. A six-inch shift reopens the drain line and requires a licensed plumber and inspection.
- Adding an electrical circuit – a new GFCI for a heated towel bar, a dedicated line for a bidet seat, or a light where none existed.
- Waterproofing a new shower – a new pan and liner is inspected, and inspectors in Clark County want to see the liner before tile goes over it.
What typically doesn’t require a permit:
- Replacing a toilet, faucet, or vanity in the same location.
- Repainting or re-caulking.
- Swapping a mirror or light fixture on an existing circuit.
Permit fees for a bathroom remodel in Henderson generally run a few hundred dollars, plus the plan-review time. The inspection sequence is short: rough-in plumbing and electrical, then the shower pan liner, then final. The reason fees matter less than they look is that unpermitted fixture moves can surface as a resale problem years later, when a buyer’s inspector flags work that has no record.
Waterproofing: the most consequential decision in a shower
Waterproofing is where a shower remodel succeeds or fails, and it’s the one decision homeowners most often leave entirely to the installer. There are three systems in common use in Henderson, and each carries a different cost and inspection path.
- Schluter Kerdi membrane. A bonded sheet membrane that goes directly over the substrate, with a pre-formed shower pan and drain. It’s fast, it’s a bonded system, and it’s preferred in a lot of new construction because the pan comes as one piece. Material cost runs higher; labor is often lower because the setter isn’t waiting on a hot-mop cure.
- Traditional hot-mop liner. A hot-applied asphalt membrane over a sloped mortar bed. It’s the older standard and still common in resale work. It’s robust, but the pan is built in layers, and if the slope is off the shower pools water – a slow failure you notice two years later as a soft spot or a grout line that won’t stay white.
- Liquid-applied membrane (RedGard and similar). A roll-on coating applied in coats over cement board. It’s the lowest material cost and the most forgiving on odd shapes, but the thickness and coat count have to be right, and the pan still needs a proper pre-slope. It’s the system where installer discipline matters most.
Whichever system goes in, the inspection sequence is the same: the substrate and pan liner are inspected before tile. Skipping that step is the single most common reason a Henderson shower fails a few years after install. We’ve seen Schluter pans pass on the first walk-through and hot-mop pans come back for a re-slope, and the difference was the installer, not the brand. We flag the waterproofing method in the written scope so you know exactly what’s behind the tile before anyone mixes thinset.
Tile, fixtures, and realistic Henderson lead times
The relationship between what’s on the shelf and what’s special-order shapes your schedule more than any other buying decision. Here’s what Henderson-area suppliers actually stock.
Tile. Daltile, MSI, and Emser all have Henderson-area distribution and showrooms. Standard field tile and common porcelain colors are usually in stock and available within a few days. Large-format (24×48 and up) and mosaic patterns are frequently special order, running two to four weeks – and if you’re matching an existing floor or a specific lot, add a week for the shipment to clear. Order tile first; it’s the longest clock in the project.
Fixtures. Kohler, Moen, and Delta are stocked at Ferguson Supply in Henderson and at plumbing wholesalers across the valley. A standard toilet, a common faucet, and a typical shower valve are usually on the shelf. Finish upgrades – a matte black or a specialized brass – push into special order range, one to three weeks.
Shower systems. Schluter and Wedi components are stocked at tile distributors in the valley. A standard Kerdi kit is typically available quickly; a linear drain or a custom pan size runs longer.
Where a project pulls in other trades – a bathroom addition on the back of the house, or a new roofline over the addition – our Home Additions & ADU in Henderson work uses the same material-sourcing discipline. Materials like James Hardie siding and Tuff Shed storage structures are the kind of brands we price from actual supplier quotes rather than estimates.
Henderson’s hard water and what it does to your finishes
Southern Nevada Water Authority reports average total dissolved solids around 278 ppm. That’s hard. It changes two things in a bathroom remodel over a ten-year horizon: grout maintenance and faucet finish life.
- Grout joints. On an unsealed cementitious grout, you’ll be resealing every 12-18 months in a Henderson shower, not every three years. Epoxy grout costs more upfront but survives the mineral load far longer, and in our experience it’s the better call in this water. The spec matters, so we name it in the quote.
- Faucet aerators. Mineral scale clogs aerators fast. Plan to pull and soak them every six to twelve months. A faucet with a serviceable aerator you can remove by hand is worth $30 more than one you have to wrench off.
- Finish life. Chrome holds up best against spotting and cleaning chemicals. Brushed nickel is close behind. PVD (physical vapor deposition) finishes on Kohler and Delta hold color far longer than older electroplated finishes, but any dark finish – matte black especially – shows water spots in hard water. If spotting bothers you, chrome is the honest answer.
The practical takeaway: pick the finish you can live with spotted, seal or epoxy the grout, and don’t fight the water with a cleaner that strips the finish faster than the water would.
Reading the rough-in before you sign anything
The rough-in is the plumbing, electrical, and framing hidden behind tile and drywall. It’s the reason two bathrooms that look identical on a listing photo can cost $12,000 apart. Here’s the sequence we run before any bathroom quote hits paper in Henderson.
- Inspect the supply and drain behind the vanity and shower valve. We open the wall access panel or scope the drain where the fixture allows, and document the pipe material and condition with photos.
- Confirm slab or raised foundation. Slab-on-grade dominates Henderson housing. If a drain move is on the table, we know within a visit whether the slab has to be cut.
- Check the shower valve and drain location against the planned layout. A tub-to-shower conversion that keeps the drain in place saves a slab cut; a move to a linear drain usually doesn’t.
- Photo-document the condition, label what needs replacement, and either include it in the written scope or flag it as a possibility with a range. Any change after work starts requires a signed change order – no work proceeds until the customer signs.
That documentation is standard on every visit, not an upgrade. A customer should leave the estimate reading with the same photo record our crew captured. If a contractor quotes a bathroom without opening anything up, you’re being quoted the best case, not the likely case.
Related trades come up more often than people expect. Bathroom work that touches the exterior wall or adds a vent often leads to roofing work in Henderson, and a bathroom addition with a new drive approach runs into Driveway & Pavers in Henderson permitting. If the bathroom shares a wall with a fence line or a new exterior access, Fence Installation in Henderson is the adjacent scope.
Common Mistakes to Avoid
- Quoting the tile before the rough-in. Two Henderson bathrooms with the same square footage can differ by $10,000 based on what’s behind the wall. The plumbing condition belongs in the quote, not in a “possible” line after demo.
- Assuming a toilet move is a small change. In slab-on-grade Henderson, moving a toilet six inches cuts concrete, requires a licensed plumber, and can add $1,500-$4,000. Get the drain line confirmed before you commit to a layout.
- Choosing a liquid-applied membrane with no inspection record. RedGard is a fine product and a poor choice if the installer doesn’t document coat thickness and pre-slope. The waterproofing method belongs in the written scope.
- Ordering tile last. Large-format and mosaic are routinely two to four weeks out in Henderson. Order tile before demolition – it’s the longest clock in the project.
- Fighting hard water with the wrong grout. Unsealed cementitious grout in a Henderson shower needs resealing every 12-18 months. Epoxy grout costs more and saves hours of scrubbing.
- Skipping the permit to save a few hundred dollars. Unpermitted fixture moves surface at resale. The permit and inspection are cheap insurance on a $25,000 project.
- Signing a quote with no change-order discipline. “We’ll figure it out as we go” is how a $22,000 bathroom becomes a $31,000 one. A written price that doesn’t move without your signature is the whole point.
See the difference
Before
After
Before
After
Before
AfterWhen to Call a Professional
Call a licensed professional for any project that moves a fixture, adds an electrical circuit, or rebuilds a shower waterproofing system – those are the triggers that turn a cosmetic refresh into permitted, inspected work. Call a plumber for a slab drain reroute, and call an electrician for any new GFCI in a wet area. The trade vocabulary to ask about: is the drain in a slab or a raised foundation, and what waterproofing system is going in the shower pan. If a contractor can’t answer both, keep looking. Rowan Construction Group Henderson offers free estimates in Henderson – call (833) 954-5920. We’ll give you a written price before any work starts, and we’ll bring a competitor’s estimate into the office for a free line-by-line second opinion if you want one.
Frequently Asked Questions
Fixture-only replacement runs $3,000-$8,000, a full cosmetic remodel without moving plumbing runs $10,000-$22,000, and a full gut with a new layout runs $20,000-$45,000+. The biggest swing is whether you move a fixture. Call (833) 954-5920 for an exact quote against your specific room – estimates are free.
Yes if you move a fixture, add an electrical circuit, or build a new waterproofed shower; no if you replace like-for-like fixtures, paint, or swap a vanity in place. Fees typically run a few hundred dollars, plus a short inspection sequence – rough-in, shower pan liner, final. Call (833) 954-5920 and we’ll walk you through what your project requires.
Fixture-only work is often a few days, a cosmetic remodel runs roughly two to four weeks, and a full gut with a new layout usually runs four to eight weeks plus permit review. Tile lead time is the most common schedule wildcard. Call (833) 954-5920 to schedule an estimate and get a realistic timeline for your project.
Not unless the scope changes and you sign a change order. We put a flat written price before any work starts, and no work proceeds on a change until the change order is signed. If a hidden condition turns up in the rough-in, we document it, quote the fix, and wait for your signature. Call (833) 954-5920 for a written price.
All three – Schluter Kerdi, hot-mop liner, and liquid-applied RedGard – work when installed to spec by a competent installer. The differences are cost, cure time, and inspection path. What matters more than the brand is the pre-slope and the documentation. Call (833) 954-5920 and we’ll specify the system in the written scope.
Daltile, MSI, and Emser all distribute to the valley; standard porcelain is usually available in days, while large-format and mosaic are two to four weeks. Kohler, Moen, and Delta are typically stocked at Ferguson Supply in Henderson. Special finishes add one to three weeks. Call (833) 954-5920 for a given lead-time check on your selection.
The Bottom Line

A Henderson bathroom remodel costs what it costs because of the rough-in behind the wall, the tile labor rate, and whether you move a fixture. Get all three on paper before you sign anything. The rough-in inspection – with photos – is standard, not an upgrade. The waterproofing method goes in the written scope, not in the installer’s head. The price is flat and the change order is signed, or the work waits. That’s the discipline behind a project that lands where the number said it would. Call (833) 954-5920 for a free estimate and a written price before demo day.
Written by the team at Rowan Construction Group Henderson.


